Tailgate Wrap Kit

Rain hits hard, mud flies, and the Silverado keeps pushing forward. Stormbreaker is a heavy graphic with serious presence.

Choose your border color: Matte black for full edge or bright white for high contrast.
Then set your interior fill: Go solid for a sharp look or add dense topo lines for maximum terrain character.
Want texture? Add the raised topographic gloss layer, subtle in the shade, wild in the sunlight.
This kit is made for the 2015–2022 Chevy Colorado crew cab and includes two precision-cut panels, one top and one smaller bottom piece.
Looking for more? Pair it with our Colorado Hood insert or the Rampart Rockers.
Installation difficulty: Medium, flat area and a linear graphic to install. You have extra vinyl on the left and right, but must center with logo and handle on install.

General Vinyl Installation Guidelines

To ensure a flawless installation and maximum longevity of your Sticky Vinylz graphics, follow these essential guidelines before beginning any install. These steps apply to all our vinyl kits, whether small hood accents or full-body wraps.

1. Environment & Temperature Requirements

• Install in a shaded, wind-free environment—no direct sunlight.
• Ideal surface temperature: Between 50°F and 80°F.
• Avoid extreme conditions—too cold and the vinyl won’t adhere properly, too hot and it may stretch or distort.
• If installing in cooler temperatures, allow the vinyl to adjust to room temperature before application.

2. Surface Preparation

• Thoroughly clean the area with soapy water, dry and clean again with isopropyl alcohol (70% or higher) to remove grease, dirt, or oily residue.
• The surface must be completely dry before applying the vinyl.
• Remove any existing decals, adhesive residue, or wax before installation.
• If the vehicle was recently washed, avoid spray wax or ceramic coatings before application.

3. Installation Process Overview

• Always pre-fit your vinyl graphics by placing them on the vehicle using painter’s tape before removing the backing paper.
• Use the hinge method (explained in each kit’s instructions) for a precise and bubble-free application.
• Squeegee outward from the center to ensure proper adhesion and remove trapped air.
• Avoid wet installs unless explicitly recommended. Our vinyl features air-release channels designed for dry installation.
• Work slowly and methodically, applying even pressure. Once pressure is applied, the adhesive activates, making repositioning difficult.

4. Post-Installation Care

• Avoid washing your vehicle for at least 4 days to allow the adhesive to cure.
• Do not use high-pressure washes directly on the vinyl edges.
• Hand washing is a must unless you like damaging your investments, your call.

Installation Guides by Kit

Hood Side or Small Graphics

Designed for Jeep Wrangler, Gladiator, and similar vehicles, these kits are easy to medium in difficulty.

• Uses the dry hinge method for alignment.
• No need to remove hinges or emblems.
• Includes air-release channels for bubble-free application.
  → [Full Installation Guide Here]

Side Fender Vent Graphics

These one-piece vinyl graphics fit precisely on side fender vents without transfer tape.

• Uses body lines as reference points for accurate positioning.
• Requires gentle pressure at first, then final firm squeegee application.
• Easy to install but requires patience for proper alignment.
  → [Full Installation Guide Here]

Hood Top Insert Graphics

Covers the raised hood section, such as Rubicon or Mojave-style hood tops.

• Pre-fit before removing backing paper to align with factory ridges.
• Squeegee firmly from center outward to secure a seamless look.
• Avoid stretching the vinyl over contours—allow it to conform naturally.
  → [Full Installation Guide Here]

Scrambler Kit

A panel-specific kit where each piece is precision-cut for Gladiator body lines.

• Diagram placement is crucial—test fit all pieces before applying.
• Start from the front panel and move towards the rear.
• Uses the dry hinge method for installation.
  → [Full Installation Guide Here]

Ribbon Patch Kit

Similar to the Scrambler Kit, but with a distinct design approach.

• Panel-specific application—test fit each piece before beginning.
• Uses the hinge method for smooth application.
• No panel stretching required—align and apply as cut.
  → [Full Installation Guide Here]

Need Additional Help?

Each kit comes with detailed instructions, but if you have any questions, feel free to reach out.

💬 Contact Us for Installation Support
📩 Email: sales@stickyvinylz.com

Your rig. Your adventure. Our Graphics. 🚙🔥

Free shipping on orders over $50 to the lower 48 and Armed Forces addresses. Orders under $50 ship for a flat $5.

Every kit is made to order and ships in 3–5 business days, usually sooner. If you ask for a proof, the 3–5 days start once you approve it.

Want to see it first? Ask for a digital proof at checkout and I will wait for your OK before cutting.

1. Can I install these decals myself?

All of our decals are cut and made ready to install. Some take more patience and experience than others; but, if you do not feel confident in completing the install yourself, professional installation is recommended.

2. Why are big multi-colored decals shipped in a single layers, and everyone else is shipping in 2 different layers?

We use printable wrap vinyl and are able to design and print in multicolor format due to our state-of-the-art printer, without having the need to layer different color vinyl

3. Why is the shipping cost only $5 on orders under $50?

The low shipping cost will merely cover the packaging material used to protect your order. To make the transaction easier on everyone, we cover the shipping cost on all orders shipped to CONUS over $50 (excludes HI and AK)

4. Do you offer Military discount?

Absolutely! As a military family ourselves, we offer discounts to Military Service Members, First responders and Teachers. Please use the GovX verification link to receive your code and apply this during checkout.

5. Can I pick up my order, if I am local to Green Cove Springs, FL?

Of course you can. Please send us a message to set up your pick up, these are set by appointment only.

6. Do you offer installation, if I am local to Green Cove Springs, FL?

Of course we do. Installation appointments must be coordinated at least a week in advance; pro install is $60 for small pieces, $100 for a hood, $200 for a tailgate (includes tail light and camera removal and reinstall) and $200 for Side Quest; removing old vinyl is $75/hr, quoted case by case; fees will be collected when your appointment is made and your vehicle must be dropped off, there is no waiting room available. 

7. What if the color I want is not listed on the page?

Please contact us prior to placing your order. If you have a special vinyl color in mind, please check the color Pantone on the color chart page to se the abundant color choices; you simply tell us the code of the color chosen in the note to seller, in the checkout page, there will be no additional cost required.

8. Can you make a completely custom design?

We can certainly make a design for you. Use our Custom Design request form so that we can determine the time and cost for your custom design; increased processing time may apply, and a $60 design fee (includes up to 2 rounds of revisions; extra revisions are $60/hr) may be required depending on your request.

9. Do you only make Jeep decals?

No, we cater to all vinyl requests. We have other models ready to ship in our Non-Jeep decal section, or predesigned decals can be made to your dimensions requested.

10. Can I see the design prior to shipping it?

We can send a digital rendering to your email address on file, if you request it during checkout. If you request a rendering, we will wait for your approval prior to cutting your order.

11. Why do you not have the decals in stock and ready to ship?

All of our orders are made for you and only after the order has been placed. The vast amount of different combinations available makes it impossible for us to stock. So, please understand that we take the time to make this specifically for you.

12. Why is there no refund option?

Same reason we may take a certain amount of time to process the order for you, is the reason we can’t grant refunds. This is made for you and we cannot sell the order to someone else, once it has been shipped to you.

13. What if the order is damaged?

We stand by our products. Please check the packaging and your order in its entirety, if something is damaged during shipping, contact us ASAP to report the shipping damage, with pictures of the packaging and damaged items, and we will determine a replacement to send out, if required.

14. What if I damage the order during installation?

If the items are damaged during installation, we will not replace it free of charge, but we can determine a replacement cost for the damaged pieces and may offer a lower cost for the damaged pieces. Don’t be that guy and try to slide a damaged install as a shipping damage, it is easy to figure this out.