Home / Help Center / Vinyl Care Guide

Sticky Vinylz Help

Straight answers from a small shop in Green Cove Springs, FL. Ships in 3–5 business days.

Vinyl Care Guide

Your graphics are 3M IJ175Cv3 premium cast vinyl with UV-cured matte ink and no laminate. A little care keeps them looking right.

Right after install

  • Do not wash the vehicle for at least 4 days so the adhesive can cure.
  • Small bubbles work their way out over time through the air release channels. Press any you see toward the nearest edge.

Washing

  • Hand wash.
  • Do not aim a high-pressure washer at the vinyl edges.

Before you install

  • Clean with soapy water, dry, then clean again with isopropyl alcohol (70% or higher).
  • Remove old decals, adhesive residue and wax first.
  • Skip spray wax and ceramic coatings on the area before install.
  • Install in shade with no wind, with the surface between 50°F and 80°F.

How long it lasts

3M rates IJ175Cv3 film for about 10 years of expected outdoor life unprinted. Printed life depends on sun exposure and care, so we do not promise a longer number than 3M does.

Care FAQ

When can I wash my vehicle after install?

Wait at least 4 days. That gives the adhesive time to cure.

How should I wash vinyl graphics?

Hand wash. Do not aim a high-pressure washer at the vinyl edges.

What should I avoid before install?

Do not apply spray wax or ceramic coatings to the area before install. Clean with soapy water, then isopropyl alcohol (70% or higher), and let it dry completely.

How long does the vinyl last?

3M rates IJ175Cv3 film for about 10 years of expected outdoor life unprinted. Printed life depends on sun exposure and care.

Full install steps: install guides.

Questions? Contact Richard at sales@stickyvinylz.com.

More help

More help

Help CenterStart here for answers on shipping, install, care and ordering.FAQShipping, install, materials, fit, returns, pickup and more.Install guidesStep-by-step guides for every kit, plus the general rules.Care guideHow to wash and look after your graphics.Vinyl types and finishesSolid, Printed Topo and Textured Topo, and the 3M film behind them.Fitment by vehicleFind kits cut for your make, model, years and trim.Ordering and proofsHow orders, renderings, custom quotes and approvals work.

Questions? Contact Richard at sales@stickyvinylz.com.